CCALEN=THE_CALIBRATION_COUN, CTCRST=NO_EFFECT_, CLKEN=THE_TIME_COUNTERS_AR
Clock Control Register
| CLKEN | Clock Enable. 0 (THE_TIME_COUNTERS_AR): The time counters are disabled so that they may be initialized. 1 (THE_TIME_COUNTERS_AR): The time counters are enabled. |
| CTCRST | CTC Reset. 0 (NO_EFFECT_): No effect. 1 (RESET): When one, the elements in the internal oscillator divider are reset, and remain reset until CCR[1] is changed to zero. This is the divider that generates the 1 Hz clock from the 32.768 kHz crystal. The state of the divider is not visible to software. |
| RESERVED | Internal test mode controls. These bits must be 0 for normal RTC operation. |
| CCALEN | Calibration counter enable. 0 (THE_CALIBRATION_COUN): The calibration counter is enabled and counting, using the 1 Hz clock. When the calibration counter is equal to the value of the CALIBRATION register, the counter resets and repeats counting up to the value of the CALIBRATION register. See Section 30.6.4.2 and Section 30.6.5. 1 (THE_CALIBRATION_COUN): The calibration counter is disabled and reset to zero. |
| RESERVED | Reserved. Read value is undefined, only zero should be written. |